Installation Guide

Page 9
Alignment / Grommet Precaution
Page 8
Do Not Kink The Grommet
Do Not Kink The Grommet
To maintain the integrity of the
water sealling grommet, do not
kink, deform or put pressure
on the grommet when dressing
the wires during install of
Aligning The Lights:
Clearwater Lights are designed as auxiliary lights, adjustment is up
to the user depending on their needs. Ask an assistant to help you with this
procedure. Make sure the bike is on level ground and have an assistant sit
on the bike. We have found that levelling the lights works well to limit glare for
oncoming traffic while maintaining optimal light projection. You may find that a
slight downward angle (a couple degrees) is helpful.