Installation Guide

Page 7
Step 1: Parts List and Bike Preparation
Switched Hot, High Beam, Horn Functions
Page 6
Harness
CANopener
8. Mount the dimmer
box on the handlebars
as shown in the photo
here. Use the supplied ‘L’
bracket to position the
dimmer in a comfortable
orientation. The wire from
the dimmer should be
routed to the Clearwater
Lights harness and
plugged into the mating
green connector.
9. Mount the supplied
switch on the handlebars
and follow the wiring
diagram on page 3 for
more wiring details.
10. Route the power
wires from the
Clearwater Lights
harness down to the
battery. Use the supplied
zip tie pull tool to pull
the power wires through
the tight spaces. Ensure
the fuse and fuse holder
are attached to the
positive (red) power wire.
However, do not connect
to the battery until
installation is complete.