Installation Guide

www.hilti.com
Hilti PROFIS Engineering 3.0.68
Input data and results must be checked for conformity with the existing conditions and for plausibility!
PROFIS Engineering ( c ) 2003-2021 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
8
Company:
Address:
Phone I Fax:
Design:
Fastening point:
|
Concrete - Apr 5, 2021
Page:
Specifier:
E-Mail:
Date:
8
4/5/2021
Coordinates Anchor [in.]
Anchor x y
c
-x
c
+x
c
-y
c
+y
1 -1.575 -1.575 - - - -
2 1.575 -1.575 - - - -
3 -1.575 1.575 - - - -
4 1.575 1.575 - - - -
7 Installation data
Anchor type and diameter: HIT-HY 200 + HIT-Z 3/8
Profile: Round bars (AISC), 2 1/2; (L x W x T) = 2.500 in. x 2.500 in.
Item number: 2018440 HIT-Z 3/8" x 4 3/8" (element) /
2022793 HIT-HY 200-R (adhesive)
Hole diameter in the fixture (pre-setting) : d
f
= 0.438 in. Maximum installation torque: 177 in.lb
Hole diameter in the fixture (through fastening) : d
f
= 0.500 in. Hole diameter in the base material: 0.438 in.
Plate thickness (input): 0.500 in. Hole depth in the base material: 2.375 in.
Recommended plate thickness: not calculated Minimum thickness of the base material: 4.625 in.
Drilling method: Hammer drilled
Cleaning: Compressed air cleaning of the drilled hole according to instructions
for use is required
3/8 Hilti HIT-Z Carbon steel non-cleaning bonded expansion anchor with Hilti HIT-HY 200 Safe Set System
7.1 Recommended accessories
Drilling Cleaning Setting
• Suitable Rotary Hammer
• Properly sized drill bit
• - • Dispenser including cassette and mixer
• Torque wrench
1 2
3 4
x
y
3.000 3.000
1.425 3.150 1.425
1.425 3.150 1.425
3.0003.000