User`s guide

To place a call using a corded phone

1. Within 30 feet of the hub, put on your Bluetooth listening device.

2. On the hub, press and release .

The lifter raises the phone handset, and you hear the dial tone in your listening device.

Note: If you did not install the handset lifter and your phone does not include a headset mode, you must manually lift the handset

from the phone base.

3. Press the desired keys on your telephone keypad.

4. (Optional) Adjust the tone and volume:

• Slide the TONE slider on the hub until you hear the tone that you prefer.

• Adjust volume on your Bluetooth listening device or phone.

Note: If you increase volume on the listening device and the phone, and sound distortion occurs, lower the volume on the

listening device or the phone.

5. To end the call, press and release .

The lifter returns the phone handset to the resting position on the base.

Note: If you did not install the handset lifter and your phone does not include a headset mode, you must manually return the

handset to the base.