User`s guide
13
Bluetooth pairing and disconnection
The rst time that you use the QH2 system, you must pair the hub with the Bluetooth headset, streamer or neckloop that you will wear while
using the system.
To pair the QH2 hub with a Bluetooth headset, streamer or neckloop
If necessary, consult your Bluetooth listening device user's guide to locate its multi-function button for pairing and to identify its pairing
indicators.
1. Wear your Bluetooth listening device, and remain within three feet of the QH2 hub.
2. On the hub, press and hold until the blue and red light ashes.
3. Turn on your listening device, and then put it in the Bluetooth pairing mode.
When the hub and listening device are paired, the hub ashes a blue light every three seconds. Your listening device also indicates
when pairing is successful.
4. Conrm that you hear a dial tone by taking one of these steps:
• For systems using a corded-phone with no headset mode and no installed handset lifter:
a. On the hub, press and release .
b. Manually lift the handset from the base.
You should hear the dial tone in your Bluetooth listening device.