User`s guide
12
Setup
1. Connect the hub:
a. Connect one end of the AC power adapter assembly to the DC 9V port on the left side hub, and then
connect the other end of the assembly to an AC power outlet in the wall.
b. Remove the telephones RJ11 jack from your wall phone line socket. Plug in the provided phone splitter.
c. Connect the hub-to-splitter cable: Connect one end of the cable into the LINE port on the hub, and then
connect the other end of the cable to a port on the phone line splitter.
The green light on the hub will not illuminate until you have connected a bluetooth headset,
neckloop or hearing aid streamer to it and engaged the line. See page 13 for "Bluetooth
Pairing and disconnection."
2. Pick up the telephone handset, and conrm that you hear a dial tone.
TIP: Make sure the compatibility dial on the back of the hub is turned to face the white dot for best results.