User`s guide
9
d. Connect the hub-to-lifter cable: Connect the L-shaped connecter to the LIFT port on the bottom of
hub, and then connect the other end of the cable î‚¿rmly to the port on the top of the lifter.
2. Connect the hub:
a. Remove the curly cord from the phone base, and then connect it to the HANDSET port on the
bottom of the hub.
b. Connect one end of the AC power adapter assembly to the DC 9V port on the left side of the hub, and then connect the other
end of the assembly to an AC power outlet in the wall.
c. Connect the (short) Hub-to-base cable to the phone base port where the curly cord was connected.
Connect the other end of the cable to the BASE port on the top of the hub.
The green light on the hub illuminates only if the hub is on the correct compatibility setting for your
phone. If the green light does not illuminate, refer to page 10 for compatibility settings or adjustments.