Owner`s manual

86
Settings
9 Topboard
When playing an acoustic grand piano, the position of the instrument’s topboard (lid) aects both the volume and
‘openness’ of the tone produced. A fully open topboard allows sound waves to reect o the polished lid surface
and project into the room, while a closed lid has the opposite eect, resulting in a darker, more opaque tone.
The CS10 digital piano attempts to simulate these characteristics, with four dierent topboard positions.
* This Virtual Technician setting will aect acoustic piano sounds only.

Topboard positions
Topboard position Description
Open 3 (default) Simulates the character of a fully open topboard.
Open 2 Simulates the character of a half open topboard.
Open 1 Simulates the character of a partially open topboard.
Closed Simulates the character of a closed topboard.
1. Selecting the Topboard setting
After entering the Virtual Technician menu (page 76):
Press the d or
c
buttons to select the Topboard setting.
2. Changing the Topboard position
Press the e or f buttons to cycle through the dierent
Topboard types.
* To reset the Topboard setting to the default position, press the
FUNCTION button (RESET).
* Any changes made to the Topboard setting will remain until the
power is turned o.
* Preferred Topboard settings can be stored to a Registration memory
for convenient recall. Please refer to page 30 for more information.
3. Exiting the Topboard setting
Press the FUNCTION button (BACK) to exit the Topboard
setting and return to the Function Menus screen.
Virtual Technician Settings