Owner`s manual

53
Recorder
2. Selecting an audio le
Press the d or
c
buttons to move the selection cursor, then
press the
FUNCTION button (SELECT) to select the audio le.
The audio play screen will be shown in the LCD display.
3. Playing the selected audio le
Press the PLAY/STOP button.
The selected audio le will start to play, and information about
the le will be shown in the LCD display.
Audio le,
artist/song
Playback
volume
Playing
position

Controlling audio le playback
While the audio le is playing:
Press the PLAY/STOP button to pause and resume playback.
Press the e or f buttons to rewind or advance the playing
position of the audio le.
Press the d or
c
buttons to adjust the playback volume of the
audio le.
* The playback volume can be adjusted within the range of 1 - 128.
Press the FUNCTION button (A-B) twice to set the start and
end points of the A-B loop.
* Pressing the A-B button for a third time will turn o the loop.

USB Player Edit menu
The USB Player Edit menu allows the playback mode (Single, 1-Repeat, All-Repeat, Random) to be changed, and the pitch of the keyboard
to be transposed in semi-tone steps. Please refer to page 56 for more information.

Overdub function
The Overdub function allows the sound of the CS10 to be recorded (overdubbed) to an existing MP3 or WAV audio le.
Please refer to page 58 for more information.
4. Exiting USB playback mode
Press the FUNCTION button (BACK) to exit USB playback
mode and return to normal operation.
* If the selected audio le contains embedded metadata (e.g. ID3 tags)
such as artist name and song title, this information will be also be
shown beside the lename.
dc buttons:
Adjust playback volume.
ef buttons:
Rewind/advance playing position.
* There may be a noticeable dierence in volume between audio le
playback and the CS10 keyboard sound. When playing back audio
data, please adjust the volume of the audio le as desired.