Owner`s manual

49
Recorder
5 Converting a song to an audio le
This function allows recorder songs stored in internal memory to be played back and saved (converted) as an audio
le to a USB device in either MP3 or WAV format.
1. Selecting the Convert to Audio function
After entering the Internal Player menu (see page 47):
Press the d or
c
buttons to move the selection cursor over the
Convert to Audio function.
Press the FUNCTION button (ENTER) to select the Convert to
Audio function.
2. Selecting the song/part to be converted
Press the d or
c
buttons to move the selection cursor over the
song memory or part.
Press the e or f buttons to change the selected song memory
(1-10) or part (1, 2, or 1&2) to be converted.
If a part has already been recorded, a
*
symbol will be shown.
Press the
FUNCTION button (OK) to continue.
3. Selecting the audio le format
Press the e or f buttons to select the desired le format for the
converted song.
It is also possible to adjust the recording gain at this stage.
* For more information about the instrument’s audio recorder gain
setting, please refer to page 50.
4. Starting the conversion
Press the PLAY/STOP button, or a key on the keyboard.
The LED indicator for the PLAY/STOP and REC buttons will turn
on, the selected song will play, and the convert to audio process
will start.
* Notes played on the keyboard will also be recorded to the audio le.

Naming and saving the converted audio le
Please follow the ‘Recording a MP3/WAV audio le’ instructions on page 51 from step 4.
dc buttons:
Move selection cursor.
dc buttons:
Move selection cursor.
ef buttons:
Select song memory/part.
ef buttons:
Select audio recorder format.