Owner`s manual

26
Playing the Piano
In addition to reverb, various other eects can be applied to the selected sound, altering the tonal character
and feeling of the instrument. As with reverb, some sound types enable certain eects automatically in order to
enhance tonal quality. The CS10 digital piano features 11 dierent eect types, with 4 combination eects, and 3
additional amplied eects.

Eect types
Eect type Description
Stereo Delay Adds an echo eect to the sound, playing through both speakers (stereo) simultaneously.
Ping Delay Adds a ‘ping pong’ echo eect to the sound, giving the impression that it is ‘bouncing’ from left to right.
Triple Delay Similar in principle to Ping Delay, but with an additional centre echo.
Chorus Layers a slightly detuned version of the sound over the original, thus enriching its tonal character.
Classic Chorus Similar in principle to Chorus, but intended for vintage electric piano sounds.
Tremolo Continuously varies the volume at a constant speed, adding a vibrato type eect to the sound.
Classic Tremolo Similar in principle to Tremolo, but intended for vintage electric piano sounds.
Auto Pan Alternates the sound output from left to right across the stereo eld using a sine wave.
Classic Auto Pan Similar in principle to Auto Pan, but intended for vintage electric piano sounds.
Phaser Applies a cyclic phase change to the sound, giving the impression that the sound is moving.
Rotary
Simulates the sound of a rotary speaker commonly used with vintage electronic organs.
There are three dierent levels of overdrive, with and without a Chorus eect.
* The soft pedal can be used to alternate the speed of the rotary simulation between ‘Slow’ and ‘Fast’ eect modes.
Combination Eects
Dierent combinations of the above eects, applied simultaneously.
* Combination eect types: Phaser+Chorus, Tremolo+Chorus, Phaser+AutoPan, Chorus+Chorus
Amplied Eects A selection of the above eects, with a vintage electric piano speaker eect applied.
1.TurningEectson/o
Press the EFFECTS button to turn eects on/o.
The LED indicator for the EFFECTS button will turn on to indicate
when eects are in use, and the current status will briey be
shown in the LCD display.
Eect
status
Eect
type

Eects settings
Eect type Eect setting Description
Stereo Delay / Ping Delay / Triple Delay Dry / Wet Adjust the intensity of the delay.
Time Adjust the interval of time between each delay.
Chorus Dry / Wet Adjust the intensity of the chorus.
Speed Adjust the speed of the chorus.
Eects