Owner`s manual

118
Appendix
ConnectingtoOtherDevices
The CS10 digital piano features a variety of jacks that allow the instrument to be connected to MIDI devices,
computers, speakers, and mixers. It is also possible to connect external audio sources, such as an MP3 player,
tablet, or a secondary keyboard, to the instrument’s amplier and speaker system. The illustration below provides
a visual overview of the connectors and their typical applications.
Connect the instrument
to external speakers,
ampliers, mixers, etc.
Connect the instrument
to MIDI modules, other
instruments/devices, etc.
Connect the instrument
to a computer to send
or receive MIDI data.
Connect the audio from
other devices to the
instrument’s speakers.
USB type ‘B’
USB type ‘A’
Before connecting the CS10 digital piano to other devices, ensure that the power to both the instrument and the
other device is turned off. If connections are established while the power is turned on, extraneous noise that can
damage the CS10 digital piano may activate the instrument’s amplifier protection circuit, preventing any sound
from being produced. If this occurs, turn the power off and then on again to reset the amplifier protection circuit.
Do not connect the LINE IN and LINE OUT jacks of the CS10 digital piano together with the same cable. An audio
loop (oscillation sound) will occur, resulting in damage to the unit.