Owner`s manual
109
Settings
3
Load User Memory
The Load User Memory function is used to load a CS10 user memory setting le stored on a USB memory device into
the instrument’s User Memory. The loaded settings will be used as the default settings every time the CS10 digital
piano is turned on.
* This function will overwrite the previously stored User Memory settings.
* For more information about the instrument’s User Memory feature, please refer to page 74.
1. Selecting the Load User Memory function
After entering the USB Menu (page 106):
Press the d or
c
buttons to select the Load User Memory
function.
Press the
FUNCTION button (ENTER).
The le selection screen will be shown in the LCD display, listing
CS10 user memory les stored on the USB memory device.
2. Selecting the user memory le to be loaded
Press the d or
c
buttons to move the selection cursor, then
press the
FUNCTION button (LOAD) to select the user memory
le.
A conrmation message will be shown in the LCD display,
prompting to conrm or cancel the load operation.
3. Conrming the load operation
Press the FUNCTION button (YES) to conrm the load
operation, or the
FUNCTION button (NO) to cancel.
4. Exiting the Load User Memory function
Press the FUNCTION button (BACK) to exit the Load User
Memory function and return to the Function Menus screen.