Owner`s manual

108
Settings
2 Load Registrations
The Load Registrations function is used to load a CS10 registration le stored on a USB memory device into the
instrument’s registration memories.
* This function will overwrite all existing Registration memories.
* For more information about the instrument’s Registration feature, please refer to page 30.
1. Selecting the Load Registrations function
After entering the USB Menu (page 106):
Press the d or
c
buttons to select the Load Registrations
function.
Press the
FUNCTION button (ENTER).
The le selection screen will be shown in the LCD display, listing
CS10 registration les stored on the USB memory device.
2. Selecting the registration le to be loaded
Press the d or
c
buttons to move the selection cursor, then
press the
FUNCTION button (LOAD) to select the registration
le.
A conrmation message will be shown in the LCD display,
prompting to conrm or cancel the load operation.
3. Conrming the load operation
Press the FUNCTION button (YES) to conrm the load
operation, or the
FUNCTION button (NO) to cancel.
4. Exiting the Load Registrations function
Press the FUNCTION button (BACK) to exit the Load
Registrations function and return to the Function Menus
screen.
To use the loaded registrations, please refer to the Registration
instructions on page 30.
USB Menu