User`s manual

6. LED indicator

LED indicator Status of BTS001

Red and blue LEDs

flashes alternately

Pairing mode

Blue LED flashes

once every 2 seconds

Standby mode and connected to a Bluetooth

device/during a call

Red LED is on Music is transmitted to BTS001 by using the

input socket

Blue LED flashes

quickly

Incoming call/calling

 Care and maintenance

Read the following recommendations before using the BTS001. Following

these you will be able to enjoy our product for many years.

 Keep it dry and don’t take it to damp places to avoid the product’s

internal circuit being affected.

 Keep the product away from direct sunlight or hot places. High

temperatures will shorten the life of electronic devices, destroy the

battery or distort certain plastic parts.

 Don’t expose the product to cold areas. It may damage the internal circuit

board.

 Don’t try to disassemble the product as it may get damaged if you are not

professional.

 Don’t let it fall down onto the floor or other hard surfaces. The internal

circuit might get damaged.

 Don’t use intensive chemical products or detergent to clean the product.

 Don’t scratch the surface with sharp things.

 Please take out the batteries from the product if you don’t use it for a

long time.

 FAQs

1. What to do when the BTS001 can’t pair with Bluetooth device?

a) Make sure the BTS001 has entered pairing mode;