User`s manual

2. Pairing the BTS001 with Bluetooth devices

How to enter pairing mode

Function Status of BTS001 Operation LED indicator

Just turned off Press and hold

button for

3-5 seconds

Red and blue

LEDs flash

alternately

Enter

pairing

mode

Turned on and not

connected to a

Bluetooth device

Short press

button

Red and blue

LEDs flash

alternately

Remarks:

 Pairing mode will last 5 minutes, the BTS001 will turn off automatically

if no device can be connected after 5 minutes.

 You will hear 2 “Du” tones while entering pairing mode.

 When the BTS001 exits connection with a Bluetooth device or

disconnects to a Bluetooth device owing to exceeding effective range, it

will return to pairing mode automatically.

Pairing the BTS001 with a Bluetooth cell phone

Please make sure your cell phone is Bluetooth-enabled. Specific pairing

steps may vary with different cell phones. Please refer to your cell phone’s

user’s manual for further information. The general pairing steps are as

follows:

1) Keep BTS001 and your Bluetooth cell phone within 1 meter when

pairing;

2) Enter BTS001’s pairing mode (refer to “How to enter pairing mode);

3) Turn on your cell phone’s Bluetooth function and search for Bluetooth

devices. After the search is completed, select “BTS001” from the

Bluetooth device list;

4) According to the indication, enter password or PIN No:”0000”, and

press ”Yes” or “confirm”;

5) After successful pairing, select “BTS001” from the Bluetooth device list

and press “connect”;

6) After successful connection, the Blue LED of BTS001 will flash once

every 2 seconds.

Remarks:

 If the pairing has failed, please switch off BTS001 first and then try

re-pairing according to steps 1～6 mentioned above.