User's Manual

9
16
NOTES:
DIAL
b. To play the SOS message
PLAY SOUND
DIAL
SOS
STOP
NOTES:
SOS
STOP
1. In the message, you should tell the helper to press one of the
special buttons (0~9,*,#) to confirm that your SOS message has
been received.
2. If you want to record a message for less than 10 seconds, you
can press the button to confirm and exit.
Press the or button to select menu and press the
button to play the SOS message.
After setting the SOS number and message, you can use the function
conveniently whenever.
Press the button on the remote control unit or base unit. Then
the telephone will dial the first SOS number.
If there is no response in 30 seconds or the line is busy, the telephone
will dial the second SOS number. If there is still no response in 30
seconds or the line is still busy, the telephone will dial the next
number in turn until all the numbers you set are dialled twice.
If someone on the other end lift the handset, the telephone will play
the SOS message you recorded to ask for help. You can press the
button on the remote control unit or the base unit to cancel the
SOS calling.
1. After lifting the handset, the helper should press one of the special
buttons (0 9,*,#) to confirm. Otherwise, the telephone will dial the
next SOS number automatically.
2. In the tone dialling mode, if the helper press one of the special
buttons (0 9,*,#) to confirm, the caller's telephone will enter
speakerphone state automatically to receive the confirmation.
3. After pressing the button to ask for help, you can enter the
speakerphone state to have a word with the helper. Then you can
press the button on the remote control unit or the base unit to
cancel the SOS calling if necessary.
st
~
~
6 Receiver and sending volume adjustment button
Ringer volume control
8. Ringer, Strobe, Shaker switch
9. One -touch memory
Your phone provides several options to alert you that you have a new
incoming call. The loud, adjustable ringer as well as the bright strobe
and optional bed shaker or any combination of these allow you to
customize the phone to fit your needs. If you want to activate strobe
light, set the switch to . If you want to activate the shaker, set the
switch to . If you want activate the strobe light and shaker, set the
switch to .
You must insert the adapter to support the strobe light and
shaker.
The unit can store 6 one-touch memory numbers including a priority
number ( ), 30 digits maximum for each button.
In on-hook state, enter the desired number
by keypad, then press and hold the location button (M1~M5, ) to
store it, and the LCD will show .
Pick up the handset or press the
button. Just press the location button (M1~M5, ) to dial out the
matching number.
NOTE:
SAVE OK
SPEAKER
To store the number
To dial the number
-
-
.
7.
The button is located on the handset. To decrease sending and
increase receiving volume, press and hold the button while making a
call by handset. To return to the normal, just release the button.
To adjust the ringer volume, move the switch located on the
right side of the unit to the desired position ( ).
RING