User's Manual

Status Report
If you have activated this feature, after sending a message, the system will r
1. Press soft key in standby mode.
2. Press soft key to select .
3. Repeatedly press or key to select , press soft key.
4. Press or key to choose , press soft key.
5. Use or key to select to activate this function or select to deactivate it
Menu
OK Message
Settings OK
Status Report OK
On Off
, then press
soft key.OK
eport whether the
sent message was delivered or not.
Reports whether or not the sent message was delivered.
Does not report whether or not the sent message was delivered.
On:
Off:
26
41
There are 3 buttons ( ~ ) for frequently used numbers, each number can be up to
20 digits.
M1 M3speed dial
1. Press soft key in standby mode.
2. Repeatedly press or key to select , press soft key.
3. Use or key to select the desired position , or , press soft key.
4. Press soft key again, then enter a number that you want to use, press to save.
Menu
Set M1/M2/M3 OK
M1 M2 M3 OK
OK OK
Storing Speed Dial Numbers
Dialing Speed Dial Numbers
After the setting, you can press , or in standby mode, then press to dial out the
corresponding number.
M1 M2 M3 OK
Editing a Speed Dial Number
1. Press soft key in standby mode.
2. Repeatedly press or key to select , press soft key.
3. Use or key to select the desired position , or , press soft key.
Menu
Set M1/M2/M3 OK
M1 M2 M3 OK
Speed Dial