User's Manual

4. Press soft key to choose .
5.
OK Service Center
E
nter the service center number (up to 20 digits), then press soft key. The display shows .OK Done!
Validity Period
Set the validity period of the message you are sending. If it run over time and the message is still
sent unsuccessfully, it will not be sent again.
Message
, then press soft key. The display shows .OK Done!
1. Press soft key in standby mode.
2. Press soft key to select .
3. Repeatedly press or key to select , press soft key.
4. Press key to choose , press soft key.
5. Use or key to select among , , , , ,
and
Menu
OK
Settings OK
Validity Period OK
1 Hour 12 Hours 24 Hours 1 Week 1 Month 3
Months Maximum
25
42
4. Press soft key again to choose , then you can press the key to clear the
digits then enter the desired ones, press to confirm.
OK Set/Edit Delete
OK
Deleting a Speed Dial Number
1. Press soft key in standby mode.
2. Repeatedly press or key to select , press soft key.
3. Use or key to select the desired position , or , press soft key.
Menu
Set M1/M2/M3 OK
M1 M2 M3 OK
4. Use or key to select , press soft key to clear this number.Delete OK