User's Manual

Insert Number - To insert a contact number in your message.

If you have previously selected or , enter the phone number to which

you want to send the message by using the keypad, or press soft key to enter the phone

book in order to choose a desired contact. Then press to confirm and send the message.

When the message is being sent, the display shows , or it shows

followed by . You can press soft

key to send it again or press to quit.

Only Send Send And Save

Message Sent Successfully

Sending Failed Message Sent Unsuccessfully. Retry? Retry

Cancel

Change Phone Code

You can change your phone password.

1. Press soft key in standby mode.

2. Repeatedly press or key to select , press soft key.

3. Press soft key again to select .

4. Repeatedly press or key to select , press soft key.

6. Press key to select , press soft key.

7. Enter the current Phone Code, press . Then enter the new code you want to use and press

. Then enter the new code again to confirm and then press . If the

old password is correct and the two entering for new password is the same, the display will

show to complete the setting.

Settings OK

OK Phone Settings

Security Settings OK

Change Phone Code

Done!

5. You will be asked to enter the current Phone Code (the default code is ). Use the numeric

keypad to enter the code and then press soft key.

to save the setting

1234