User's Manual

Hold down key for 3 seconds or longer.

If no SIM card is inserted in the cellular

phone, a message window that

is displayed. In this case, only

emergency call can be made and other

functions cannot be used.

Insert SIM

Card

Switching On/Off

Note

YOU SHOULD

FULLY CHARGE THE PHONE BEFORE

USING.

Nothing will appear on the LCD when

battery power is very low.

Switching On

Hold down key for 3 seconds until the

icon appears on the LCD, then the display

disappears.

Switching Off

Network Selection

This function allows you to choose a network when you are using an international roaming service

whether by manual or by automatic selection. However, a roaming network is available to choose

when your network provider has an agreement on roaming service with the roaming provider.

1. Press soft key in standby mode.

2. Repeatedly press or key to select , press soft key.

3. Repeatedly press or key to select , press soft key.

4. Repeatedly press or key to select , press soft key.

5. Use or key to choose or , press soft key.

Settings OK

Network Settings OK

Network Select Mode OK

Automatic Selection Manual Selection OK

Charging the Mobile Phone (continued)

You can also plug the connector in the mini

USB port on the phone directly to charge

the mobile phone. Please refer to the

figures on the right.