User's Manual

When a call is received, Call information will

appear. If the caller can be identied, the caller's

phone number is displayed. If the caller cannot be

identied, only the Call information displays. If you

have a voice message, the "MSG WTG ON" and

jnfk icon will be shown on the LCD.

1. To answer a call, press the

key. If you have

activated the Auto Answer function, when the

handset is on the base, simply lift it up.

2. You can speak. To end the call, either press the

key or replace the handset on the base.

After you hang up, the LCD displays the call

duration.

Notes:

• You can select the ringer volume by using Up

key or Down

key when the phone rings

with an incoming call.

• If you want to delete the

icon, press the Up

key in standby mode, then press and hold the

key for several seconds. After that, press

the

fkey to return to standby mode. (The

handset must be registered to the base.)

• If the polyphonic ring tone is set, the ring

tone may continue for 4 seconds after the

callers hang-up or after the parallel phone had

answered the call.

To place, answer or end a call using a headset

Calls