User's Manual

116
Additional handsets
Register additional handsets to the base
Your telephone handset is registered to the base
(Base-1).
If you purchased additional ClearSounds A700
handsets, you must register each additional
handset to the ClearSounds A700 base. The base
can accommodate a total of ve handsets.
Each handset’s registration number appears on the
handset’s home screen.
Before registering a handset to the base, you
should press and hold the
key (on the bottom of
the base) for about 5 seconds.
To register an additional handset to the base
1. Press the Menu soft key.
2. Press Up
key or Down key repeatedly
to choose the Registration menu. Press the
Select soft key.
3. Press the Select soft key again to choose Base
1. The handset will search for the requested
base and the relevant information will ash on
the LCD.
4. If the base is found, you will be prompted to enter
the PIN code (0000). Enter the PIN then press
the Select soft key. If the PIN is code is correct,
the registration tone will sound and then the base