User's Manual

BUEFORE SING
4
TROUBLESHOOTING
23
Base Unit
Location of Controls
If you experience trouble with your unit, please check following items
before calling for help.
Problem Cause & Remedy
Troubleshooting
Make sure the telephone line cord
is connected firmly to the base
unit and the telephone jack.
Make sure the AC adapter is
plugged into an outlet and the wall
switch is on.
Your phone may be too far away
from the base unit. Move closer to
the base unit.
You may have too many extension
phones on your telephone line to
allow all of them to ring.
Try unplugging some of the other
phones.
The handset is located beyond the
range of the base Unit. Or the
handset is out of registration.
Place the handset On the base
cradle.
Move closer to the base unit or
replace the handset on the base
cradle. Try again a few seconds
later.
If the phone does not ring
with an incoming call
If you hear two beeps when
trying to use the phone
AC adapter unplugged or main
power failure.
The unit does not work
Charge Indicator
In Use
Indicator
Page button
Charge Pins
Adapter socket
Telephone
line jack
Ringer volume
switch (HI/MI
/LO/OFF)
Shaker socket