User's Manual

HSANDSET ETTINGS

To make a call

To receive a call

To end a call

Pre-dialling function

1. Press button and wait for a dial tone.

2. Dial the telephone number.

3. During a call, you can press button to get a new dial tone for

another call or switch to call waiting.

To receive a call, just press button.

To end a call, just press button.

1. In standby mode, dial your desired number. You can press button to

delete the incorrect digits.

2. If the phone number is correct, press button to dial it out. Then

you can start your conversation.

Basic Function

NOTE:

volume and tone receiver select

amplify

volume and tone receiver select

shaking

1.If you move the switch up, the

amplify function are automatically activated each time you use the

phone. If you want to deactivate the function temporarily, press the

button once, at the same time, the LED turns off.

2.If you turn the switch down, the

amplify function are automatically deactivated each time you use the

phone, you will need to activate the function temporarily by pressing

the amplify button.

You can move the switch to up position, when a call is

receiving, the handset will shake. To turn off this function, just move

the switch to down position.

Vibration function