User's Manual

Before Using

BFASIC UNCTION

Phone Book

Storing names and numbers to phone book

Reviewing names and numbers in phone book

You can store up to 60 names and numbers in the memory.

1. In standby mode, input the number you want to store by keypad.

2. Press button and then the LCD will show .

3. Enter the name by keypad. If the next character is on the same button

as the previous one, you need to for about 2 seconds before entering

the next character. You can press button to delete the error characters.

4. Press button to confirm and exit.

1. In standby mode, press or button repeatedly to find out the

Caller ID number you want to add.

2. If the number with caller's name, press button to store. If the

number without caller's name, press button, then enter the

name. After that, press button again to store.

In standby mode, press button, then the LCD shows the total

number of records.

Then there are to review the records:

1. Adding names and numbers to phone book:

2. Copying Caller ID numbers to phone book:

MEMO

name

3ways

OUT OF AREA

ERROR

MESSAGE WAITING

This message will display when someone calls from an area where the

telephone company is not offering the caller identification services or

is not yet providing name and number delivery to your area via the long

distance net work.

If there are some error information in the incoming number or your

telephone cannot receive the information correctly, the LCD will show

ERROR. This does not mean that there is something wrong with your

phone.

If you have voice mail service from your telephone company and a

recorded message is left, the will turn on and flash. You can

press button twice to delete the icon.

NOTE: This function should be supported by your local telephone

company.

MESSAGE