CL-3108 USER'S MANUAL
Congratulation for buying our high quality product. It is necessary to read through the manual carefully to find out all features and how to operate this cordless phone. Before first Use Please read IMPORTANT SAFET Y INSTRUCTIONS on pages 25~26before use. Accessories Take out from box: cordless handset, belt clip and base unit, in addition each carton contains the following accessories: AC Adapter (One) Telephone line cord (One) 9.
Important safety instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including following items: 1. Please understand all instructions in the operation manual. 2. Follow all warnings and instructions marked on this unit. 3. Unplug this unit from wall outlets and telephone jacks before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for the job.
Features If you hear noise or static during a phone conversation Move closer to the base unit. Keep the base unit away from PCS, family videos, game and fax machines. Press the "CH." key to switch to another channel. The T V or VCR picture becomes distorted while talking Remove the base unit as far away from the TV or VCR as needed. Interference and noise on line Move away from T V, VCR, c o m p u te r s , f a x m a c h i n e s , electronic equipment and other motor device.
Troubleshooting Location of Controls If you experience trouble with your unit, please check following items before calling for help. Problem Base Unit In Use Indicator Charge Indicator Cause & Remedy The unit does not work AC adapter unplugged or main power failure. If you hear two beeps when trying to use the phone If the phone does not ring with an incoming call 23 Charge Pins The handset is located beyond the range of the base Unit. Or the handset is out of registration.
Handset Deleting a single Caller ID number 1. Press s or t button, the LCD shows the total number of CID numbers and new numbers.(ALL XX NEW XX) Visual ringer 2. Press s or t button to find out the number you want to delete. 3. Press F button twice to delete the number.
Press 1 button to dial the number ahead with the 1 digit. Belt clip TALK Press 7 button to dial the last 7 digits of the number. Receiver volume and tone select switch TALK Press 8 button to dial the last 8 digits of the number. TALK Receiver volume switch Amplify button Receiver tone switch Shaking switch Deleting all Caller ID numbers 1. Press s or t button, the LCD shows the total number of Caller ID numbers and new numbers.(ALL XX NEW XX) 2.
Caller ID Operation Installation Reviewing the Caller ID list Base unit Connect the telephone line and the power. 1. Press s or t button, the LCD shows the total number of Caller ID numbers and new numbers.(ALL XX NEW XX) 2. Press s or t button to review the other caller numbers. Dialling the Caller ID numbers Single-Line Telephone Jack AC Adapter Telephone Line Cord During the reviewing mode, press showed on the LCD.
2. Press Install the battery button to dial it out. (1) Slide the battery compartment cover downwards. Deleting all records from phone book 1. In standby mode, press MEMO button, then the LCD shows the total number of records. (2) Insert new batteries as indicated, matching correct polarity (+, -). (3) Slide the cover up until it snaps in place. 2. Press F button twice, then all of the records will be deleted. Deleting a single record from phone book 1. Find out the record you want to delete.
a. Press s or t button to review the records. LCD Informations b. Enter the caller's name, then press MEMO button to review the matching record. Description In standby mode: In this mode, the LCD will show the handset number, date and real time. 00: 47 01/01 c. Enter the first character of the caller's name, then press MEMO button. The LCD shows the matching records, press s or t button to get your desired record.
Phone Book Storing names and numbers to phone book You can store up to 60 names and numbers in the memory. 1. Adding names and numbers to phone book: 1. In standby mode, input the number you want to store by keypad. 2. Press MEMO button and then the LCD will show name. 3. Enter the name by keypad. If the next character is on the same button as the previous one, you need to for about 2 seconds before entering the next character. You can press F button to delete the error characters. 4.
Out of range warning Handset Settings Handset registration 1. Make sure the base unit is connected into the AC outlet and line jack. 2. Press and hold the button on the base unit. After 3 seconds, press the CH button on the handset, the unit will give you a confirmation beep, which means that the code has been set and the handset will show HS -1 on the LCD. 3.
Last number redial Press LCD contrast setting button, then press R/P button to redial the last dialled number. Press SEL button, then 2 button, and then the current level contrast adj X(X=1,2,3,4) will show on the LCD. Press s or t button to get the desired level and press SEL button once more to confirm and exit. CH button During the conversation, the phone will scan the clear channel automatically. If you still hear noise or static, press the CH button to find a clearer channel.
NOTE: 1.If you move the volume and tone receiver select switch up, the amplify function are automatically activated each time you use the phone. If you want to deactivate the function temporarily, press the amplify button once, at the same time, the LED turns off. 2.If you turn the volume and tone receiver select switch down, the amplify function are automatically deactivated each time you use the phone, you will need to activate the function temporarily by pressing the amplify button.
Warning: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
