Instruction Manual

Using the Quartet Keypads to Listen to Audio
6-3
All specifications subject to change without notification. All rights reserved. Copyright © 2007 NetStreams
Main +1 512.977-9393 / fax [phone] / Toll Free Technical Support [phone]
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
Trigger Key Macros
Press the left arrow key to trigger key macro 13. Press the right arrow key to trigger
key macro 14.
Special Functions
Sleep
Press STOP and MODE, then key 7 to turn sleep ON. Press STOP and MODE, then
key 7 again to turn sleep OFF.
RNR
Press STOP and MODE, then key 8 to turn RNR ON. Press STOP and MODE, then
key 8 again to turn RNR OFF.
Using the Remote to Navigate the Menu
You can control the menu by pointing the remote at the IR window on the front panel
of the MRP or on any of the keypads and pressing MENU. If the MRP is visible, you
will see the following screen appear:
Figure 6-2 Menu screen
The keys on the bottom of the remote are key to navigating through the menus. Their
functions are as follows:
MUTE Moves back to the previous screen.
MENU Displays the Quartet menu and is used to select an item.
Up Arrow Moves up a selection in a list.
Down Arrow Moves down a selection in a list.
Right Arrow Moves to the next or previous column in the menu list; also used to
increase a value.