User Manual

DigiLinX Dealer Setup Version 2.35.00
5-16
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax [phone] / Toll Free Technical Support [phone]
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
Figure 5-14 ViewLinX Display tab
This screen requires you to enter a label, which will appear in the GUI, and a macro. Building macros is
discussed in Chapter 11.
4. Select the IR tab.
The IR tab appears as shown in Figure 5-15.
Table 5-9
ViewLinX Display Tab
Tab Selection Description
Audio/Video Display Settings .
Source Name The name of the source connected to ViewLinX.
Enable Service Enables or disables the source.
Display Controls
Label Name appearing on the button that executes the macro.
Macro Designates the macro associated with the label.