User Manual

DigiLinX Dealer Setup Version 2.35.00
3-22
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax [phone] / Toll Free Technical Support [phone]
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
NOTE: By default, projects are saved to the My Documents folder. To create a
DigiLinX folder, continue to the next step.
2. Browse to the area where you want to store your project files.
3. Select the Create Folder ( ) icon.
A new folder appears with the cursor in the name field.
4. Type DigiLinX to create a DigiLinX folder and press Enter.
The new DigiLinX folder displays.
5. Double-click on the new DigiLinX folder.
6. In the Filename field, enter the name under which you want to save this file (for
example, “JohnDoe”).
NOTE: The Files of Type has only one selection: NetStreams DigiLinX Project Files
(*.nsp). When looking for your project, it will always be stored with an .nsp
extension.
See Figure 3-27 for an example how to complete your project save window.
Figure 3-27 Completed project save window information
7.
Select Save As... .
Your project is saved in the desired folder.
NOTE: If you are configuring Dealer Setup while disconnected from the network, shut
your computer down before connecting to the DigiLinX network.