User Manual

DigiLinX Dealer Setup Version 2.35.00
15-6
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax [phone] / Toll Free Technical Support [phone]
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
Figure 15-7 Info tab
9.
Select the Settings tab.
Settings information displays (see Figure 15-8).
Table 15-1
SMM100 Info Tab
Tab Selection Description
Info Current IP Address The IP address currently used by the SMM100.
Subnet Mask The subnet mask of the SMM100.
Device Type Should always be SMM for an SMM100.
Model Number The model number of the SMM100.
Firmware Version The version of the SMM100 firmware.
Device Name: The name you gave the device when you added it to the
project.
Override Changes the default device name. Keep unchecked in most
instances.
Serial Number The serial number of the device attached to the DigiLinX
network.
Device Comments Indicate where the device is installed so that if you need to
return to the installation for service or upgrading devices, you
can have access to this information in the project file.
Device Summary Name The name you gave the device when you added it to the
project.
CoverArt File names the SMM100 uses for cover art you have added.
Folder Names Keywords for folder names that indicate where to look for
media.