User Manual

DigiLinX Dealer Setup 2.35.00
13-6
All specifications subject to change without notification. All rights reserved. Copyright © 2006 NetStreams
Main +1 512.977-9393 / fax [phone] / Toll Free Technical Support [phone]
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
Figure 13-8 Source Tab for TheaterLinX product
The source tab allows the specification of the naming of the sources connected to the
various AVR inputs. The labels on the source tab will either read source 1-8 for IR
controlled AVRs or AVRs with custom RS-232 drivers or will read the specific labels
for the Denon and Marantz AVRs which are controlled via RS-232.
The information for each source is as follows:
In addition to specifying this information about the source, source presets can be set
from this page by using the ‘Edit Presets for:’ drop down box. Presets are ONLY used
for Tuner sources.
Field Description
Name The name of the source
Port The control port on the TheaterLinX used to control the
source
Type The source type
Enabled Indicate whether the specific source is enabled
Browse Indicate whether the source has content that can be
browsed (e.g. a tuner) or not (e.g. a CD player); reserved
for future use