User Manual

IR Tools
7-5
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax [phone] / Toll Free Technical Support [phone]
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
Figure 7-5 Commands to Learn for ViewLinX
8.
Select any IR commands you use for control of audio or video sources and macros.
NOTE: The remaining screens in this chapter show learning IR on a MediaLinX,
although learning IR is the same process for both MediaLinX and ViewLinX.
NOTE: Everything is selected by default. You can deselect all and only select
commands that you need. The Prev and Next buttons are used specifically for a
KeyLinX (buttons 5 and 6). You can program them with any IR command you
want assigned to those buttons.
9. Select Continue.
The first button to learn displays (see Figure 7-6).