User Manual

Editing Devices
5-131
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax [phone] / Toll Free Technical Support [phone]
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
2. Click on the Settings tab. The Settings tab appears as shown in
Table 5-93 TheaterLinX Settings Tab
Tab Selection Description
Settings TheaterLinX Name Allows you to name the TheaterLinX.
AVR Name Allows you to name the Audiio Video Receiver.
Enable Front IR Receiver This checkbox either enables or disables the front IR
receiver.
Who should handle the volume? ????????
Input Select Sets which audo input type the TheaterLinX will receive
audio from the AV receiver. Select from either:
 Analog (24 bit ADC) Input
 Digital (S/PDIF) Input
Input Level Raises or lowers the input level. Select from 0db to -12db (in
3 db increments).
AVR Power Sensor Select what method the TheaterLinX will use to detect if the
AVR is powered ON. Choose from:
 None
 Level
 LED
 Video Sync
Display Power Sensor Selects from what method the TheaterLinX will use to detect
if the display is powered ON. Choose from:
 None
 Level
 LED
 Video Sync