User Manual

Editing Devices
5-113
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax [phone] / Toll Free Technical Support [phone]
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
Figure 5-97 Info tab for Vantage
Table 5-79
Vantage Info tab
The Info tab displays information about the Vantage system.
3. Select the IR/RS232 Settings tab.
The IR/RS232 Settings tab for the ControLinX hosting Vantage displays in the right side of the window (see
Figure 5-93).
Tab Selection Description
Info Current IP Address The current IP address of the ControLinX.
Current Subnet Mask The current subnet mask of the ControLinX.
Device Type The type of DigiLinX device that this is.
Model Number The NetStreams ControLinX model number.
Firmware Version The firmware version the device is running.
Device Name Descriptive name the installer assigned to the device when
creating the project.
Enable Service Enables the service.
Serial Number Serial number of the ControLinX.
Device Comments Indicate where the device is installed so that if you need to
return to the installation for service or upgrading devices, you
can have access to this information in the project file.
Device Summary
Show Advanced Options Normally used for advanced configurations. Typically, the
installer will not use this screen.