User Manual

DigiLinX Dealer Setup Version 2.35.00
5-72
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax [phone] / Toll Free Technical Support [phone]
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
The Audio tab provides for adjustment of the SpeakerLinX amplifier settings. This includes adjusting the
amplifier to accommodate speakers of a particular impedance. Table 5-46 and Table 5-47 provide information
on the fields available for editing the Audio tab.
Table 5-46
Audio Tab for the SpeakerLinX SL220
Tab Selection Description
Audio Room Name The name of the room where the SpeakerLinX is located.
This displays on all user interfaces.
Service Type A display field used to indicate the service type.
Speaker Impedance Allows dealer to change the impedance settings of the
amplifier in the SpeakerLinX (default is 8 Ohms).
Volume Limit
Establishes a maximum volume level limit.
Stereo Mode
Choose between stereo, and mono/summed.
Lineout Volume Level Allows dealer to determine if the EIM Line out will be fixed
(user cannot adjust volume from the TouchLinX) or variable
(volume can be adjusted from the TouchLinX).
Volume Level
Default level of the volume at startup.
Bass Adjusts the bass level of the SpeakerLinX.
Treble Adjusts the treble level of the SpeakerLinX.
Balance Adjusts the balance of the SpeakerLinX.
Service Name
A display field used to denote the stream name.
Show Audio Settings on user
interface
Enables the audio settings to be adjustable from the
TouchLinX.