User Manual

Editing Devices
5-53
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax [phone] / Toll Free Technical Support [phone]
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
3. After adjusting information, select Apply.
4. Select the Labels tab.
The Labels tab for the ControLinX hosting Panorama displays in the right side of the window (see Figure 5-
44).
Figure 5-44 Labels tab for the ControLinX hosting Panorama
Table 5-33
ControLinX IR/RS232 Settings Tab
Tab Selection Description
IR/RS232 Settings Service Name Field used to name the device.
Driver The driver used for the connected device.
NOTE:Once you’ve selected Panorama as the driver for this
ControLinX, you will not be able to change it to any
other device without removing the CL100 from the
device list and re-adding it.
Driver File Name of the driver file.
Control Type
Defined by the specific product driver.
Baud Rate Information provided by the manufacturer of the attached
device.
Data Bits Information provided by the manufacturer of the attached
device.
Parity Information provided by the manufacturer of the attached
device.
Stop Bits Information provided by the manufacturer of the attached
device.