User Manual

DigiLinX Dealer Setup Version 2.35.00
5-50
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax [phone] / Toll Free Technical Support [phone]
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
Figure 5-41 Labels tab for the ControLinX hosting HomeWorks
4.
Enter a name for the phantom button in the Button Label field.
5. Homeworks also requires a keypad address. Enter a Homeworks keypad address in the Address field.
6. Select Add to add more buttons.
Table 5-31 provides information on the fields available for editing the Labels tab.
3. After adjusting information, select Apply.
4. Select the Menu tab.
The Menu tab for the ControLinX hosting a HomeWorks displays in the right side of the window (see
Figure 5-42).
Table 5-31
Labels Tab
Tab Selection Description
Labels Address The Lutron address of the keypad.
ID The button you want to assign a new label to.
Button Label 1. Click on the phantom button you want to rename.
2. Type the new name.
NOTE:There is limited space on the touch screen, so keep
the button name as short as possible.