Specifications

Chapter 3: User Options 33
TO PROGRAM THE AUTOMATIC GAIN CONTROL (AGC) AND AUTOMATIC LEVEL CONTROL (ALC)
SETTINGS
1. Press and hold the
REDIAL/PROG
key until the Program icon appears on the LCD screen (see figure 3.1).
2. Press and hold the
8
key. The current AGC setting number will be displayed on the LCD screen.
3. Press
REDIAL/PROG
. The current setting number will flash.
4. Enter a new setting number using the table shown in figure 3.2.
5. Press
REDIAL/PROG
to save the selection; a confirmation tone plays. Press
CLEAR
to exit programming.
TO RESTORE FACTORY DEFAULTS
1. Press and hold the
REDIAL/PROG
key until the Program icon appears on the LCD screen (see figure 3.1).
2. Press and hold the
9
key. The number 8 repeats across the LCD screen.
3. Press
REDIAL/PROG
to save the selection; a confirmation tone plays. Press
CLEAR
to exit programming.
The phone reboots.
Speaker
AGC
Microphone
ALC
Setting
2
1On On
On
Off
3OnOff
4 Off Off
FIGURE 3.2 MAX IP automatic gain control table