Specifications

Chapter 2: Getting Started 17
CONFIGURATION: TRACE/LOGGING SETTINGS SCREEN
Use the Configuration: Trace/Logging Settings screen (see figure 2.13) to control logging for general audio
processing and SIP subsystems, as well as system logs and trace flags.
>
Note:
This screen is only used to diagnose problems you might be experiencing on your MAX IP
phone. Before enabling any of these logs, please call customer service to receive instructions on
which logs to enable.
•
Enable ssystem llog
: Click this check box to have the system log displayed on the Device Log File screen
(see page 19).
•
Active ttrace fflags
: Click the
Apply
button to activate trace flags.
•
General LLogging
: These are various audio and call control subsystems for which logs can be generated if
enabled.
•
SIP LLogging
: These are various SIP subsystems for which logs can be generated if enabled.
•
Turn OOff LLogs
: Click this button to turn off logging.
Click the
Apply
button to cause logs selected in General Logging and SIP Logging sections to be displayed on
the Device Log File screen.
FIGURE 2.13 Configuration: Trace/Logging Settings screen