Specifications

Chapter 2: Getting Started 13
CONFIGURATION: NETWORK SETTINGS SCREEN
Use the Configuration: Network Settings screen (see figure 2.10) to set up your MAX IP phone on the network.
You can set the hostname, domain name, static IP address, subnet mask, default gateway, primary DNS IP
address, secondary DNS IP address, SNTP server 1 IP address, SNTP server 2 IP address, VLAN priority, and
VLAN ID from this screen, along with enabling/disabling DHCP and VLAN.
•
Hostname
: This is the name of the host (or the MAX IP’s device name on the network) and is the same as
the system name found on the Device Information screen.
•
Enable DDHCP
: Click this check box to enable DHCP on the MAX IP phone. When enabled, the settings for
domain name, static IP address, subnet mask, default gateway, primary DNS IP address, and secondary
DNS IP address are all grayed out as they are obtained automatically from the DHCP server. Uncheck this
box to disable DHCP. Note that the above-mentioned settings are now editable as you must enter the
appropriate values manually.
•
SNTP Server 11 aand 22 IIP Addresses
: The SNTP servers are time servers. Enter the IP address of the desired
server and click
Apply
to go out and get the current time from the corresponding time server. The time
returned is in Greenwich Mean Time, adjusted according to the setting of the time zone (see Configuration:
User Preferences Screen on page 10 for more information on the time zone setting).
FIGURE 2.10 Configuration: Network Settings screen