Specifications

9 te c h n I c a l su p p o r t : 800.283.5936
Select the following settings:9.
Bits Per Second: 9600•
Data Bits: 8•
Parity: None•
Stop Bits: 1•
Flow Control: None•
Select 10. OK.
A blank HyperTerminal screen displays. The HyperTerminal application will now recognize the
NS-MNE.
Connect the power using the Power Cable to the NS-MNE11.
Wait 30-60 seconds while HyperTerminal connects to the NS-MNE. Shortly, the screen displays
information for the NS-MNE and informs that you can make changes if you press any key within
five seconds of the information displaying.
Press any key12.
You are prompted to Accept or Modify the settings.