Instruction Manual

ViewLinX
12-
5
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax [phone] / Toll Free Technical Support [phone]
Weight 4 lbs. (2.722 Kg)
NetPower 4
Restrictions on Use of Certain Compliant
Hazardous Substances (RoHS)
Installation
There are three ways to mount a ViewLinX:
 Free-standing
 Wall mount
 Rack mount.
Free-Standing
In this type of installation, the ViewLinX is located next to a TV or in a shelf.
1. Connect the video inputs (component, composite, or S-Video).
2. Connect the Ethernet port.
3. Connect S/PDIF and Analog Audio.
4. Connect power.
Wall Mount
To mount a ViewLinX in a wall, complete these steps.
1. Screw the four screws in the wall.
2. Drill 4 holes in the wall.
3. Install the mounting brackets using four screws (not provided).
4. Place the ViewLinX in the mounting brackets.
5. Connect the video inputs (component, composite, or S-Video).
6. Connect the Ethernet port.
7. Connect S/PDIF and Analog Audio.
8. Connect power.
Rack Mount
VL100 is rack mounted using the RS1U rack shelf (sold separately).
1. Install the ViewLinX using the ears (built-in) in the rack.
2. Screw the four screws in the bottom of the ViewLinX in the rack.
3. Connect the video inputs (component, composite, or S-Video).