Instruction Manual

DigiLinX Installation and Design Guide
9-4
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax [phone] / Toll Free Technical Support [phone]
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
 80 Watts at 28VDC
 power LED
 IEC power cord
 CE, C-Tick, and RoHS compliant.
See Figure 9-4 for an example of the PL228.
Figure 9-4 PowerLinX PL228
Installation
This section discusses the installation of all PowerLinX devices.
Installing a PowerLinX PL600 or PL750
This section discusses installation of the PowerLinX PL600 or PL750 in either a rack
or a free standing environment. Refer to Table 9-1 for the maximum number of
SL220s or SL250s for the PL600 or PL750.
Installing in a Rack
To install a PL600 or PL750 into a rack, complete the following steps:
1. Install the PL51 plate (sold separately) into the rack.
Table 9-1 Maximum Number of SL220s or SL250s per
PowerLinX PL600 or PL750
PowerLinX Model Maximum
SL220s
Maximum
SL250s
PL600 6 0
PL750 12 6