Instruction Manual

DigiLinX Installation and Design Guide
7-4
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax [phone] / Toll Free Technical Support [phone]
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
IMPORTANT! The cable and EIM splitter are located under the cardboard bottom in
the KeyLinX box.
Figure 7-1 KeyLinX Configuration
NOTE:Maximum CAT5 cable length for EIM connections is 60 feet.
To connect the KeyLinX configuration shown in the figure above, follow these steps:
1. Locate the cable and splitter under the cardboard located at the bottom of the Key-
LinX box.
2. Connect the SpeakerLinX to the EIM splitter connector labeled SpeakerLinX using
the 1 foot cable provided.
3. Connect the KeyLinX to the EIM splitter jack labeled KeyLinX.
Legend
CAT5
KL1R