Instruction Manual

DigiLinX Installation and Design Guide
5-6
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
LEDs for signal detection, power detection, and activity status
Dimensions 17.25” wide x 1.75” high x 9.25” deep (438mm x 44mm x 235mm)
Weight 5.44 lb. (2.47 kg)
NetPower: 2
Five 3.5mm to RS-232 cables (included).
Connectors
The MediaLinX Pro has the following connectors:
audio input connectors: four gold-plated RCA jacks
audio output connectors: four gold-plated RCA jacks, four coaxial digital (S/PDIF)
RJ45 connector
four power sensing RCA inputs
composite video passthrough
four 3.5mm IR emitter outputs/RS-232 outputs
four contact closures
doorbell mute interface.
Installation
The MediaLinX MLA4000 can be rack mounted or it can function as a standalone
device.
Installing a MediaLinX MLA4000 in a Rack
The MediaLinX MLA4000 can be mounted using rack ears. To install a MediaLinX
MLA4000, complete these steps:
1. Screw the rack mount ears into the MLA4000.
2. Slide the MLA4000 into the rack.
3. Screw the rack ears into the rack.
For a MediaLinX:
4. Connect all legacy sources.
5. Connect Ethernet.
6. Connect power.
For a ControLinX:
7. Configure the third-party system using the manufacturers instructions.
8. Connect the IR emitter or RS-232 connector to the third party device.
9. Connect a 16/2 cable from the power port of the ControLinX to a PowerLinX.
10. Connect a CAT5 Ethernet cable from the ControLinX to a SwitchLinX.