Instruction Manual

COLLABORATE ROOM PRO AND
THE BEAMFORMING MICROPHONE ARRAY
6
USB aDapter ConneCtionS
The audio connection from the Beamforming Microphone Array to the
COLLABORATE Room Pro is made through the USB Adapter. The cable
from the Beamforming Microphone array Link OUT goes to the USB
Adapter Link IN as shown below.
From Beamforming Microphone Array Link OUTTo COLLABORATE Room Pro USB Port
To 12VDC Power Adapter
The USB cable from the USB Adapter is plugged into one of the USP
ports on the COLLABORATE Room Pro system unit.
Power to the USB Adapter is supplied by an included 12VDC power
adapter.