Specifications

Technical or Setup Assistance
Telephone: [phone] (USA) or 801.975.7200 (worldwide) • http://www.gentner.com
Audio Perfect
TM
10 Installation and Operations Manual Page 13
Warranty
Transmit and Receive Presence Indication
Open collector outputs go low when transmit and/or receive levels are present
Operating Temperature
32–100° F / 0–38° C
Humidity
0–80 percent
All specifications are subject to change without notice.
Gentner Communications Corporation (Manufacturer) warrants that this product is free of defects in both materials and
workmanship. Should any part of this equipment be defective, the Manufacturer agrees, at its option, to:
A. Repair or replace any defective part free of charge (except transportation charges) for a period of one year from the date
of the original purchase, provided the owner returns the equipment to the Manufacturer at the address set forth below. No
charge will be made for parts or labor during this period;
B. Furnish replacement for any defective parts in the equipment for a period of one year from the date of original purchase.
Replacement parts shall be furnished without charge, except labor and transportation.
This Warranty excludes assembled products not manufactured by the Manufacturer whether or not they are incorporated in
a Manufacturer product or sold under a Manufacturer part or model number.
THIS WARRANTY IS VOID IF:
A. The equipment has been damaged by negligence, accident, act of God, or mishandling, or has not been operated in
accordance with the procedures described in the operating and technical instructions; or,
B. The equipment has been altered or repaired by other than the Manufacturer or an authorized service representative of the
Manufacturer; or,
C. Adaptations or accessories other than those manufactured or provided by the Manufacturer have been made or attached
to the equipment which, in the determination of the Manufacturer, shall have affected the performance, safety or reliability
of the equipment; or,
D. The equipment’s original serial number has been modified or removed.
NO OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WARRANTY OF MERCHANTABILITY OR
FITNESS FOR ANY PARTICULAR USE, APPLIES TO THE EQUIPMENT, nor is any person or company authorized to
assume any warranty for the Manufacturer or any other liability in connection with the sale of the Manufacturer's products.
Manufacturer does not assume any responsibility for consequential damages, expenses, or loss of revenue or property,
inconvenience, or interruption in operation experienced by the customer due to a malfunction in the purchased equipment.
No warranty service performed on any product shall extend the applicable warranty period.
In case of unsatisfactory operation, the purchaser shall promptly notify the Manufacturer at the address set forth below in
writing, giving full particulars as to the defects or unsatisfactory operation. Upon receipt of such notice, the Manufacturer
will give instructions respecting the shipment of the equipment, or such other matters as it elects to honor this warranty as
above provided. This warranty does not cover damage to the equipment during shipping and the Manufacturer assumes no
responsibility for such damage. All shipping costs shall be paid by the customer.
This warranty extends only to the original purchaser and is not assignable or transferable.
Gentner Communications Corporation, 1825 Research Way, Salt Lake City, Utah 84119