Specifications

Technical or Setup Assistance
Telephone: [phone] (USA) or 801.975.7200 (worldwide) • http://www.gentner.com
Page 12 Audio Perfect
TM
10 Installation and Operations Manual
AP10
Dimensions
17"/43.2cmW x 1.75"/4.5cmH x 8"/25.4cmD
Weight
7 lbs/3.18 kg (dry) 12 lbs./5.4 kg (shipping)
Connectors
POWER: Auto-adjusting power module from 100–240Vac, 50/60Hz
REMOTE: DB25 female connector.
G-LINK IN: RS485; 38.4kbps; 110kOhm impedance, category-five twisted-
pair cable; 20-foot limit between networked units
G-LINK OUT: RS485; 38.4kbps; 110kOhm impedance, category-five twisted-
pair cable; 20-foot limit between networked units
TRANSMIT Push-on terminal block with slotted set-screw connectors; +, -, ò
INPUT: contacts provided at terminal block at +20dBm maximum input,
0dBu nominal level, >20kOhm impedance
RECEIVE Push-on terminal block with slotted set-screw connectors; +, -, ò
OUTPUT: contacts provided at terminal block at +20dBm maximum input,
0dBu nominal level, <50 Ohm impedance
LINE: RJ11 connector
SET: RJ11 connector
Power Requirements
100–240Vac, 50/60Hz, 30W
Audio Performance
Frequency Response
1dB from 250Hz to 3.5kHz (with AGC disabled)
Signal-to-Noise Ratio
>56dB reference to 0dBu at -15dBm on the telephone line
Receive Audio: Distortion
<.3% THD, 250Hz to 3.5kHz (AGC disabled)
Audio Interface
Unbalanced Transmit Audio
DB25; 0dB level input with a >10kOhm impedance
Unbalanced Receive Audio
DB25; 0dB level output with a <50Ohm impedance
Remote Control
Momentary closures to the switch common.
Specifications