Manualshelf

Owner manual

ManualsBrandsClearCube ManualsCommunicationR Series Pentium 4
101102103104105106107108109110
ClearCube Product Manual and Installation Guide MVX Installation • 97
5. Set the resolution to 1280 x 1024 (not all flat panel monitors support resolutions
greater than 1024 x 768) pixels and click Apply. Click OK if prompted.
6. Click the Advanced button and then select the Monitor tab, shown in Figure 48.
ClearCube recommends that the screen refresh rate be set to 60 Hz for flat-panel
monitor use, or 75 Hz for CRT use. Certain monitor models may work optimally at
different refresh rates, so these refresh rates should be used as guidelines, not
requirements.
Figure 47 Display Settings Tab
Figure 48 Monitor Tab